Common specifications and models of large inclination conveyor belts
Release time:
2023-07-06
There are many specifications and models of large-inclination sidewall conveyor belts. Today we will mainly talk about a few key points.
There are many specifications and models of large-inclination sidewall conveyor belts. Today we will mainly talk about a few key points. You can also refer to the parameters of the large inclination conveyor belt for understanding.
First of all, in terms of the use environment, the high-inclination conveyor belt can be divided into heat resistance, high temperature resistance, cold resistance, oil resistance, acid and alkali resistance, flame retardant and many other requirements. Except for the cold resistance, these are all for the materials used, and the cold resistance is mainly used in high-latitude and high-cold regions such as Inner Mongolia to prevent the conveyor belt from freezing and the impact of severe cold on the use of the conveyor belt.
Secondly, it is the cloth layer used inside. The quality of the cloth layer and the tension of the cloth layer are particularly important for the transportation of the sidewall conveyor belt. It is a waste if the design tension is high and the cost is high. And if the design tension is low, it may break, so you must choose carefully. Generally, the inner cloth layer has a polyester cloth layer, a nylon cloth layer, a cotton canvas cloth layer and a steel wire rope core.
Again, it is the choice of the height of the rib and the height of the partition. There are multiple requirements for the height of the ribs, such as 60, 80, 100, 120, 160, 200, etc., and the corresponding partitions are relatively slightly shorter. In this way the two interact. On the one hand, it can prevent the material from falling, and on the other hand, it can lift the material, and the two complement each other.
Keywords：
More information
Phone/WhatsApp：
E-mail:
